New firmwares available for MetroLinq

You can download the latest firmwares from our support site, or upgrade your managed devices in bulk from the Cloud controller UI.

What's new?

Here's what changed in this release:

ML 60 v1.4.0

• Fixed TIPC random memory corruption
• Fixed minor UI bugs related to display
• Fixed 5GHz radio crash when multicast traffic is being sent
• Fixed Aiming mode on 60GHz radio
• Added support for Somalia country code
• Added custom recovery for 60GHz radio
• Added Metrolinq Peers support for Metrolinq platform
• Updated multicast parameters on Metrolinq platforms
• Known issue: Radio FW version sometimes displays N/A on 60 GHz settings page

ML 2.5G v2.3.0

• New Feature: Added 12 client support for 60GHz radio
• New Feature: Added MCS12 support for 60GHz radio
• New Feature: Added STP control
• New Feature: Added Jumbo frame support for 5GHz radio (up to 7912)
• New Feature: Added support for RSTP passthrough
• New Feature: Added L2 and L3 MTU control options
• New Feature: Added Broadcast disable for backup VAP
• Improved: Added support for Somalia country code
• Improved: recovery for 60GHz radio
• Improved: RSSI (signal level) representation for 60GHz
• Improved: traffic shaping ruleset
• Improved: UI (added L2, L3 mtu to dashboard)
• Improved: failover mechanism with high system load
• Improved: Stats exchange interval
• Improved: Updated multicast parameters on Metrolinq platforms
• Fixed: Aiming mode on 60GHz radio
• Fixed: TIPC random memory corruption
• Fixed: minor UI bugs related to display
• Fixed: RCU stalls
• Fixed: Eth interface gets stuck if there is too much packet loss
• Fixed: Eth port goes up/down
• Fixed: Station disconnects and cannot reconnect
• Fixed: mDNS (GUI issues)
• Fixed: interfaces not being added to bridge
• Fixed: 60 GHz radio scan problem
• Fixed: IGMP snooping
• Fixed: missing stations list stats gathering
• Fixed: SSID validation issue
• Fixed: config restoration when management vlan is used

ML 10G Omni v2.3.0

• New Feature: Added 12 client support for 60GHz radio
• New Feature: Added MCS12 support for 60GHz radio
• New Feature: Added STP control
• New Feature: Added Jumbo frame support for 5GHz radio (up to 7912)
• New Feature: Added support for RSTP passthrough
• New Feature: Added L2 and L3 MTU control options
• New Feature: Added Broadcast disable for backup VAP
• Improved: Added support for Somalia country code
• Improved: recovery for 60GHz radio
• Improved: RSSI (signal level) representation for 60GHz
• Improved: traffic shaping ruleset
• Improved: UI (added L2, L3 mtu to dashboard)
• Improved: failover mechanism with high system load
• Improved: Stats exchange interval
• Improved: Updated multicast parameters on Metrolinq platforms
• Fixed: data vlan usage on Omni platform
• Fixed: Aiming mode on 60GHz radio
• Fixed: TIPC random memory corruption
• Fixed: minor UI bugs related to display
• Fixed: RCU stalls
• Fixed: Eth interface gets stuck if there is too much packet loss
• Fixed: Eth port goes up/down
• Fixed: Station disconnects and cannot reconnect
• Fixed: mDNS (GUI issues)
• Fixed: interfaces not being added to bridge
• Fixed: 60 GHz radio scan problem
• Fixed: IGMP snooping
• Fixed: missing stations list stats gathering
• Fixed: SSID validation issue
• Fixed: config restoration when management vlan is used

ML60 LW & ML One v2.3.0

• New Feature: Added 12 client support for 60GHz radio
  
• New Feature: Added MCS12 support for 60GHz radio
  
• New Feature: Added STP control
  
• New Feature: Added Jumbo frame support for 5GHz radio (up to 7912)
  
• New Feature: Added support for RSTP passthrough
  
• New Feature: Added L2 and L3 MTU control options
  
• Improved: RSSI (signal level) representation for 60GHz
  
• Improved: multicast parameters
  
• Improved: traffic shaping ruleset
  
• Improved: UI (added L2, L3 mtu to dashboard)
  
• Improved: failover mechanism with high system load
  
• Improved: performance with VLAN functions
  
• Improved: decreased stats interval
  
• Fixed: TIPC random memory corruption
  
• Fixed: minor UI bugs related to display
  
• Fixed: 5GHz radio crash when multicast traffic is being sent
  
• Fixed: L2 isolation on LW platform
  
• Fixed: aiming mode issues
  
• Fixed: RCU stalls
  
• Fixed: station disconnects and can't reconnect
  
• Fixed: Ethernet port goes up/down
  
• Fixed: Ethernet port stalls if there is too much packet loss
  
• Fixed: mDNS (GUI issues)
  
• Fixed: interfaces not being added to bridge
  
• Fixed: 60 GHz radio scan problem
  
• Fixed: IGMP snooping
  
• Fixed: missing stations list stats gathering
  
• Fixed: SSID validation issue
  
• Fixed: config restoration when management vlan is used
  

ML5 v2.3.0

• New Feature: Added 12 client support for 60GHz radio
• New Feature: Added MCS12 support for 60GHz radio
• New Feature: Added STP control
• New Feature: Added Jumbo frame support for 5GHz radio (up to 7912)
• New Feature: Added support for RSTP passthrough
• New Feature: Added L2 and L3 MTU control options
• Improved: RSSI (signal level) representation for 60GHz
• Improved: multicast parameters
• Improved: traffic shaping ruleset
• Improved: UI (added L2, L3 mtu to dashboard)
• Improved: failover mechanism with high system load
• Improved: performance with VLAN functions
• Improved: decreased stats interval
• Fixed: TIPC random memory corruption
• Fixed: minor UI bugs related to display
• Fixed: 5GHz radio crash when multicast traffic is being sent
• Fixed: L2 isolation on LW platform
• Fixed: aiming mode issues
• Fixed: RCU stalls
• Fixed: station disconnects and can't reconnect
• Fixed: Ethernet port goes up/down
• Fixed: Ethernet port stalls if there is too much packet loss
• Fixed: mDNS (GUI issues)
• Fixed: interfaces not being added to bridge
• Fixed: 60 GHz radio scan problem
• Fixed: IGMP snooping
• Fixed: missing stations list stats gathering
• Fixed: SSID validation issue
• Fixed: config restoration when management vlan is used