You can download the latest firmwares from our support site, or upgrade your managed devices in bulk from the Cloud controller UI.
What's new?
Here's what changed in this release:
ML 60 v1.4.0
- Fixed TIPC random memory corruption
- Fixed minor UI bugs related to display
- Fixed 5GHz radio crash when multicast traffic is being sent
- Fixed Aiming mode on 60GHz radio
- Added support for Somalia country code
- Added custom recovery for 60GHz radio
- Added Metrolinq Peers support for Metrolinq platform
- Updated multicast parameters on Metrolinq platforms
- Known issue: Radio FW version sometimes displays N/A on 60 GHz settings page
ML 2.5G v2.3.0
- New Feature: Added 12 client support for 60GHz radio
- New Feature: Added MCS12 support for 60GHz radio
- New Feature: Added STP control
- New Feature: Added Jumbo frame support for 5GHz radio (up to 7912)
- New Feature: Added support for RSTP passthrough
- New Feature: Added L2 and L3 MTU control options
- New Feature: Added Broadcast disable for backup VAP
- Improved: Added support for Somalia country code
- Improved: recovery for 60GHz radio
- Improved: RSSI (signal level) representation for 60GHz
- Improved: traffic shaping ruleset
- Improved: UI (added L2, L3 mtu to dashboard)
- Improved: failover mechanism with high system load
- Improved: Stats exchange interval
- Improved: Updated multicast parameters on Metrolinq platforms
- Fixed: Aiming mode on 60GHz radio
- Fixed: TIPC random memory corruption
- Fixed: minor UI bugs related to display
- Fixed: RCU stalls
- Fixed: Eth interface gets stuck if there is too much packet loss
- Fixed: Eth port goes up/down
- Fixed: Station disconnects and cannot reconnect
- Fixed: mDNS (GUI issues)
- Fixed: interfaces not being added to bridge
- Fixed: 60 GHz radio scan problem
- Fixed: IGMP snooping
- Fixed: missing stations list stats gathering
- Fixed: SSID validation issue
- Fixed: config restoration when management vlan is used
ML 10G Omni v2.3.0
- New Feature: Added 12 client support for 60GHz radio
- New Feature: Added MCS12 support for 60GHz radio
- New Feature: Added STP control
- New Feature: Added Jumbo frame support for 5GHz radio (up to 7912)
- New Feature: Added support for RSTP passthrough
- New Feature: Added L2 and L3 MTU control options
- New Feature: Added Broadcast disable for backup VAP
- Improved: Added support for Somalia country code
- Improved: recovery for 60GHz radio
- Improved: RSSI (signal level) representation for 60GHz
- Improved: traffic shaping ruleset
- Improved: UI (added L2, L3 mtu to dashboard)
- Improved: failover mechanism with high system load
- Improved: Stats exchange interval
- Improved: Updated multicast parameters on Metrolinq platforms
- Fixed: data vlan usage on Omni platform
- Fixed: Aiming mode on 60GHz radio
- Fixed: TIPC random memory corruption
- Fixed: minor UI bugs related to display
- Fixed: RCU stalls
- Fixed: Eth interface gets stuck if there is too much packet loss
- Fixed: Eth port goes up/down
- Fixed: Station disconnects and cannot reconnect
- Fixed: mDNS (GUI issues)
- Fixed: interfaces not being added to bridge
- Fixed: 60 GHz radio scan problem
- Fixed: IGMP snooping
- Fixed: missing stations list stats gathering
- Fixed: SSID validation issue
- Fixed: config restoration when management vlan is used
ML60 LW & ML One v2.3.0
- New Feature: Added 12 client support for 60GHz radio
- New Feature: Added MCS12 support for 60GHz radio
- New Feature: Added STP control
-
New Feature:
Added Jumbo frame support for 5GHz radio (up to 7912)
-
New Feature:
Added support for RSTP passthrough
-
New Feature:
Added L2 and L3 MTU control options
- Improved: RSSI (signal level) representation for 60GHz
- Improved: multicast parameters
- Improved: traffic shaping ruleset
- Improved: UI (added L2, L3 mtu to dashboard)
- Improved: failover mechanism with high system load
- Improved: performance with VLAN functions
- Improved: decreased stats interval
- Fixed: TIPC random memory corruption
- Fixed: minor UI bugs related to display
- Fixed: 5GHz radio crash when multicast traffic is being sent
- Fixed: L2 isolation on LW platform
- Fixed: aiming mode issues
- Fixed: RCU stalls
- Fixed: station disconnects and can't reconnect
- Fixed: Ethernet port goes up/down
- Fixed: Ethernet port stalls if there is too much packet loss
- Fixed: mDNS (GUI issues)
- Fixed: interfaces not being added to bridge
- Fixed: 60 GHz radio scan problem
- Fixed: IGMP snooping
- Fixed: missing stations list stats gathering
- Fixed: SSID validation issue
- Fixed: config restoration when management vlan is used
ML5 v2.3.0
- New Feature: Added 12 client support for 60GHz radio
- New Feature: Added MCS12 support for 60GHz radio
- New Feature: Added STP control
- New Feature: Added Jumbo frame support for 5GHz radio (up to 7912)
- New Feature: Added support for RSTP passthrough
- New Feature: Added L2 and L3 MTU control options
- Improved: RSSI (signal level) representation for 60GHz
- Improved: multicast parameters
- Improved: traffic shaping ruleset
- Improved: UI (added L2, L3 mtu to dashboard)
- Improved: failover mechanism with high system load
- Improved: performance with VLAN functions
- Improved: decreased stats interval
- Fixed: TIPC random memory corruption
- Fixed: minor UI bugs related to display
- Fixed: 5GHz radio crash when multicast traffic is being sent
- Fixed: L2 isolation on LW platform
- Fixed: aiming mode issues
- Fixed: RCU stalls
- Fixed: station disconnects and can't reconnect
- Fixed: Ethernet port goes up/down
- Fixed: Ethernet port stalls if there is too much packet loss
- Fixed: mDNS (GUI issues)
- Fixed: interfaces not being added to bridge
- Fixed: 60 GHz radio scan problem
- Fixed: IGMP snooping
- Fixed: missing stations list stats gathering
- Fixed: SSID validation issue
- Fixed: config restoration when management vlan is used